Have you just found out that your charging port is filled with water? It’s not a pleasant experience, but don’t worry—you can fix it. There are ways how to get water out of the charging port.
I remember a time back when I was sky-diving, and a water drop fell into the charging port of my smartphone; it was a terrifying experience.
I couldn’t reach a repair specialist in time, so I was forced to find a way to get the water out of my charging port.
Luckily, you can easily remove the water from the charging port of your device with the help of a few tools. But how?
In this article, I will show you how to get water out of the charging port on your device. The methods I will provide will only work if the water has not caused any long-term damage to your device.
When Does Water Gets Into the Charging Port?
When you get an alert that “water detected in charging port,” water has gotten inside the charging port or your charger. Water can enter the charging port of your device for various reasons.
1. Shower – You might have been in the shower and accidentally dropped your phone into the water or taken it with you.
2. Swimming – You may have taken your device with you while swimming, or it may have fallen into the water accidentally.
3. Rain – You were caught in the rain, and your device got soaked. This could also be a cause of water entering the charging port.
4. Spills – While taking your coffee or tea, you might have spilled some of it on your device.
5. Humidity – High humidity in the air can cause water droplets to form and enter your device through the charging port.
6. Cleaning – You may have accidentally sprayed water inside the charging port while cleaning your device.
How Do You Know If You Have Water In Your Charging Port?
The first step to getting the water out of your charging port is to determine if there is water in the charging port. The following signs indicate that there is water in the charging port:
– You can see liquid dripping or pooling from the port.
– Your device is not charging or powering up.
– The port has a white residue around it.
– You hear an unusual sound coming from the port.
– Alert messages appear on the screen, such as “water detected” or “wet port.”
– Your device behaves erratically.
If you have noticed any of these signs, water is likely in your charging port. So, what do you do next? Keep reading!
What to Do First?
1. Power Off Your Device – This will prevent any electrical damage from occurring. Water has some electrical properties; it is better to be safe than sorry.
2. Remove Accessories – Were you on music or on a call when the water got into your charging port? Remove accessories, such as headphones and phone cases, from your device. Or disconnect the charge.
3. Hold Your Phone Upright – This prevents the water from flowing into other parts of your device.
As gravity will help to ensure that the water remains in one place, hold your device upright.
4. Remove the Battery and SIM card – The battery powers your phone. This means that when you remove it, you are cutting the power of your device.
This will protect your phone from any electrical damage the water could cause.
SIM card sits right underneath the battery in your device. Removing it is essential to prevent any data loss or damage.
Note: You do this if your battery and sim card is accessible. Otherwise, you can skip this step.
5. Use Wireless Charge
What if you were just going to get your flight and wanted to call a taxi, and your phone was off? You can use a wireless charger before you get home for serious water removal from your phone.
How To Get Water Out Of A Charging Port: Easy Steps
To begin with, you should check how wet the charging port is. If it is saturated with water, you will need to take immediate steps to dry it out and prevent any damage.
1. Use a Towel
At a glance at the charging port’s wetness, grab a towel and wipe all the moisture away as much as possible. The surface of your phone should be free from standing water.
2. Turn Off the Phone
This is the first precaution whenever you are dealing with water. Immediately turn off your phone and disconnect any cable connected to the charging port.
Water causes electrical short circuits; if water comes in contact with your phone, that can damage it permanently.
This will also save time for you to act quickly on the next steps. If you want to save your phone, act fast and turn off the phone as soon as possible.
3. Remove Accessories, SIM Card, and Battery
A SIM card is a chip that contains your phone’s personal information. It connects you to your network carrier and is necessary for making calls, sending text messages, and accessing the internet.
Removing your SIM card when dealing with water is important to ensure that your data is secure.
This is because they are made of delicate material, and water can cause permanent damage.
To remove the SIM card, you will need to locate your SIM tray and insert the pin that came with your phone or any other small tool.
Press the pin until the trays pop out, and remove your SIM card. For some phones, you will need to remove the battery to reach the SIM card tray.
Once it’s out, make sure it is completely dry before putting it back in.
Similarly, if your phone is equipped with a removable battery, take it out. This will help reduce the chance of water damage occurring.
Power is an accessory that can cause the most damage when it comes into contact with water, so it’s best to remove it from your phone.
What were you doing before your phone came into contact with water? Were you charging it or using headphones to listen to your cool music? Ensure you remove any accessories connected to your phone as well.
4. Tap Your Phone Using Your Palm
This may sound very silly, but it works. Gently tap your phone against the palm of your hand or a towel to help remove any water in the crevices of your charging port.
The charging port should be facing down when you do this to ensure that any water will drip out. This will help remove the water and prevent it from entering deeper into the phone.
Repeat the tapping several times to ensure that all the moisture has been removed. You won’t probably the drops of water from your phone, but the tapping will help reduce the amount of water residue.
5. Blow Cool Air
Once you have removed all the moisture from your phone, it is time to try this magic. Do you have a vacuum cleaner or a hair dryer?
Grab one and turn it on in the cool setting. Hold your phone 10cm away from the air source, and point the dryer downwards into the charging port.
This will help remove any remaining water from your phone and also help to evaporate any moisture that is still present.
Repeat this for a few minutes until you are sure that your phone is completely dry. This will help ensure that your phone is free from any water and thus prevent it from being damaged.
6. Leave the Phone to Dry
Once all the moisture is gone, you can leave your phone to dry. Place it on a paper towel and leave it overnight before you attempt to turn it back on.
This will help to ensure that all the moisture has been completely removed and your phone is ready for use.
Never attempt to turn on the phone before it is completely dry, as this can cause further damage.
Following all these steps correctly, your phone should be safe from water damage. However, keeping your phone away from water and protecting it from accidents is always a good idea.
Also Read: How to Make Your Phone Impossible to Track
Other Methods Believed to Be Working
Doubting Thomas is everywhere. Some users believe rice, silica gel, and clove can help remove moisture from the phone.
While these methods have not been scientifically proven, it is worth trying if you are desperate and have nothing else. Below is the procedure for each of these methods:
1. Rice Method
People believe that rice is a good solution for moisture removal. Put your phone in a bowl of uncooked rice, and leave it there overnight.
The rice granules will absorb the moisture from your phone and help remove it. Leave your phone there for some days for the best results.
2. Silica Gel Method
Silica gel is a great desiccant, which makes it perfect for absorbing moisture. Place several silica gel packets in a plastic bag and put your phone inside.
Close the lid of the bag and leave it overnight. The gel packets will help remove the moisture from your phone.
Remember to replace the gel packets every few days for maximum efficiency.
3. Clove Method
Cloves are among the best desiccants available and are even better than rice or silica gel. Place some cloves inside a cloth or a container and place your phone on top.
The cloves will help absorb the moisture from your phone overnight. Change the cloves every few days for maximum efficiency.
These are some of the methods believed to help remove moisture from a phone, although they have yet to be scientifically proven.
It is always safe to follow the abovementioned steps, as they are more reliable and will help protect your phone from any water damage.
Related: How to Fix Connection Problem or Invalid MMI Code
Don’ts While Trying to Dry Your Phone
When trying to dry your phone, you should not do some things. Here are a few points that you must remember:
1. Don’t Use a Hair Dryer
Never use a hair dryer to try and dry your phone, even if it has a cool setting. The hot air from the dryer can cause permanent damage to your phone and make it unusable.
2. Don’t Submerge Your Phone in Water
Never submerge your phone in water to try and remove moisture from it. This will not work and can cause further damage to your phone.
3. Don’t Use a Heat Source
Don’t place your phone near a heat source such as an oven or stove to dry it. The heat from the source can cause permanent damage to your phone and make it unusable.
4. Don’t Rush
Never rush drying your phone; turn it back on before it completely dries. Never turn it back on before completely dry, as this can cause further damage.
5. Don’t Inserts things in Charging Ports
Never insert anything in the charging ports to try and remove moisture from it. This will not work and can cause further damage to your phone.
6. Don’t Use an Unsuitable Case
Never use a case made of materials not designed for water protection, such as rubber or plastic. These materials are not waterproof and will not adequately protect your phone.
Read more:
How to Clear Reddit Search History
Conclusion
Water damage can be a difficult problem to fix, and unfortunately, sometimes, it’s irreversible. The best way to protect your phone is to keep it away from water and moisture as much as possible.
However, if water does enter your phone, following the steps outlined on getting water out of your phone can help prevent further damage.
If you follow these steps correctly, you can save your phone from any permanent water damage.
Remember these tips; you’ll be better prepared if your phone ever gets wet. Good luck!
