Watching a show or movie can be frustrating when your remote’s volume control stops working. Various factors, including low batteries, unsynced remotes, or incorrect settings, can cause the issue. Fortunately, there are some simple troubleshooting steps that you can take to help get your remote volume control back up and running. Here are some steps to take when your Apple TV remote volume not working:
1. Check the Batteries
If your remote volume is not working, the first step should be to check the batteries and ensure they are properly installed. Batteries can often become loose, so ensure they are firmly in place. You may also need to replace the batteries if they are old or low on power.
2. Restart Your Apple TV
If the batteries are fine, try restarting your Apple TV. To do this, go to the Settings app on your Apple TV and select “System” > “Restart.” This will temporarily disconnect your Apple TV and its remote.
Once the device is restarted, reconnect and see if the volume control works. When done properly, the remote should work properly, and you can adjust the volume of your Apple TV.
3. Try a Different Remote if Apple TV Remote Volume Not Working
If your remote is still not working, try using a different remote to see if the issue is with the remote itself. If a different remote works, you may need to replace your current remote.
In case you do not have a spare remote, you can purchase an Apple TV Remote from the Apple Store or online retailers. Once you have your new remote, you need to pair it with your Apple TV.
To do this, turn on your Apple TV and press the Home button on your remote while pointing it at the Apple TV. You should see a four-digit code on your TV screen. Enter this code into your remote to complete the pairing.
Once you have paired your remote, try using it to control the volume. If the new remote still does not work, then the issue may be with your Apple TV, and you should consider contacting Apple Support for further assistance.
Related Article: Why is One AirPod Louder than the Other?
4. Resetting the Remote
Resetting means returning the remote to its factory settings. To reset your Apple TV remote, press and hold the Menu and Home buttons for about six seconds.
You should see a message indicating the remote is resetting. After your Apple TV remote is reset, it should be able to control the volume on your device correctly. You will need to pair it again to start controlling your device.
5. Update the Apple Tv Software
If you still have trouble with your remote volume control, try updating the software on your Apple TV. To do this, open the Settings app, select “System,” and then “Software Updates.”
If an update is available, follow the onscreen instructions to install it. Once updated, restart your Apple TV and check if your remote volume is working.
6. Check for Possible Interference
Signals from other wireless devices, such as Wi-Fi routers or cordless phones, can sometimes interfere with your Apple TV and remote connection.
This can be especially true if they are close to one another. If your remote volume is not working correctly, try moving any devices that might be causing interference away from your Apple TV.
You can also try turning off these devices for a few minutes and then turning them back on to see if that helps.
7. Clean the Volume Buttons
If the volume buttons on your Apple TV remote are not responding, it is likely because they have become stuck due to dirt or dust buildup.
To fix this issue, you can clean the volume buttons using a cotton swab and rubbing alcohol or isopropyl alcohol. Dip the cotton swab in alcohol and gently rub the volume buttons to remove any dust or dirt.
After cleaning the buttons, check if they are working properly. This should fix the Apple TV Remote volume not working issue. If the problem persists, try the following method.
8. Contact Apple Support if Apple TV Remote Volume Not Working
If all of the above steps do not work, it may be an issue with your Apple TV. You should contact Apple Support for further assistance. Depending on the issue, they may need to replace or repair your device.
They can also provide additional troubleshooting steps to help fix the issue. They can also replace your remote or send you a replacement part if needed.
Related Article: How to Make Your Phone Impossible to Track
When you clock in, a problem with the Apple TV remote volume is not working; you can take several troubleshooting steps to diagnose and fix it.
The solutions mentioned above should help you resolve the problem. If none work, you may need to get a new remote or contact Apple for further assistance.
With the proper steps and care, however, you should be able to get your Apple TV remote up and running again.